Phase Change Matters RSS

 

The award-winning Phase Change Matters blog tracks the latest news and research on phase change materials and thermal energy storage. E-mail tips and comments to Ben Welter, communications director at Entropy Solutions. Follow the blog on Twitter at @PureTemp. Subscribe to the weekly PCM newsletter. Or join the discussion on LinkedIn.

RECENT POSTS

TAGS

ARCHIVE

Research roundup: Spherical encapsulation; thermal therapy respirator; nanoporous composite; PCM effect on cement; more

Ben Welter - Friday, May 03, 2019

From Journal of Energy Storage:

Performance comparison of four spherically encapsulated phase change materials for medium temperature domestic applications

From International Journal of Thermal Sciences:

Exploration of a thermal therapy respirator by introducing a composite phase change block into a commercial mask

From Renewable and Sustainable Energy Reviews:

Review on nanoporous composite phase change materials: Fabrication, characterization, enhancement and molecular simulation

From Sci:

The Effect of Phase Change Materials on the Physical, Thermal and Mechanical Properties of Cement 

From Applied Energy:

High energy-density and power-density thermal storage prototype with hydrated salt for hot water and space heating

From Journal of Thermal Science and Engineering Applications:

Thermal Cycling of Calcium Chloride Hexahydrate With Strontium Chloride as a Phase Change Material for Latent Heat Thermal Energy Storage Applications in a Nondifferential Scanning Calorimeter Set-Up
Numerical Investigation of Scheffler Concentrator Receiver for Steam Generation Using Phase Change Material

From IntechOpen:

Solar Thermal Energy Storage Using Paraffins as Phase Change Materials for Air Conditioning in the Built Environment

From Reactive and Functional Polymers:

Design and fabrication of pH-responsive microencapsulated phase change materials for multipurpose applications

From Advances in Fluid and Thermal Engineering:

Experimental Investigation on a Solar Thermal Energy Packed Bed Sensible Heat Storage Combined with Latent Heat Storage

From Bulletin of Materials Science:

Development of an acetanilide/benzoic acid eutectic phase change material based thermal energy storage unit for a passive water heating system

From International Journal of Heat and Mass Transfer:

Solidification performance of a latent heat storage unit with innovative longitudinal triangular fins

Research roundup: Surface functionalization of composite PCM; EnergyPlus optimization; direct expansion solar heat pump; more

Ben Welter - Friday, April 26, 2019

From Applied Surface Science:

Effects of surface functionalization on thermal and mechanical properties of graphene/polyethylene glycol composite phase change materials

From Applied Energy:

Facile flexible reversible thermochromic membranes based on micro/nanoencapsulated phase change materials for wearable temperature sensor
Shape-remodeled macrocapsule of phase change materials for thermal energy storage and thermal management
Investigation on the thermal performance of a high temperature packed bed thermal energy storage system containing carbonate salt based composite phase change materials
Toward a new method for the design of combined sensible/latent thermal-energy storage using non-dimensional analysis
Strategic control and cost optimization of thermal energy storage in buildings using EnergyPlus
Adaptive measures for mitigating urban heat islands: The potential of thermochromic materials to control roofing energy balance

From Solar Energy Materials and Solar Cells:

Poly(styrene-co-divinylbenzene-co-acrylamide)/n-octadecane microencapsulated phase change materials for thermal energy storage

From Renewable and Sustainable Energy Reviews:

Recent advances in direct expansion solar assisted heat pump systems: A review
Review on nanoporous composite phase change materials: Fabrication, characterization, enhancement and molecular simulation

From Energy and Buildings:

Experimental Testing of Phase Change Materials in a Warm-Summer Humid Continental Climate

From International Journal of Energy Research:

Development of pentadecane/diatomite and pentadecane/sepiolite nanocomposites fabricated by different compounding methods for thermal energy storage

From Applied Thermal Engineering:

Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink

From Journal of Applied Polymer Science:

Investigations on thermal properties of microencapsulated phase‐change materials with different acrylate‐based copolymer shells as thermal insulation materials

From Solar Energy:

Experimental investigation on the impact of thermal energy storage on the solar still performance coupled with PV module via new integration

From Thermochimica Acta:

Nanoencapsulated phase change material with polydopamine-SiO2 hybrid shell for tough thermo-regulating rigid polyurethane foam

From International Journal of Heat and Mass Transfer:

Optimization of the detailed factors in a phase-change-material module for battery thermal management

From Journal of Traffic and Transportation Engineering :

A review on the best practices in concrete pavement design and materials in wet-freeze climates similar to Michigan

From Case Studies in Thermal Engineering:

Study of a passive solar air heater using palm oil and paraffin as storage media

From Acta Microscopica:

Preparation of Graphene Hybrid Material and Thermal Properties of Polymer Composites

Research roundup: PCM use in mortars; compatibility with selected plastics; myo-inositol sugar alcohol; more

Ben Welter - Tuesday, April 23, 2019

From Materials:

Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars

From Polymer Testing:
From Renewable Energy:


From Molecules:

From Applied Energy:

Natural convection during melting in vertical finned tube latent thermal energy storage systems
Year-round performance analysis of a photovoltaic panel coupled with phase change material

From Energy Procedia:

A Review of the Performance of Buildings Integrated with Phase Change Material: Opportunities for Application in Cold Climate

From Journal of Applied Polymer Science:

Encapsulation of polar phase change materials via multiemulsification and crosslinking method and its application in building

From Journal of Energy Storage:

Thermal performance of shell and tube latent heat storage unit: Comparative assessment of horizontal and vertical orientation
Experimental investigation of phase change in a multitube heat exchanger

From Chemistry Select:

Preparation and Thermal Properties of Stearic Acid/n‐Octadecane Binary Eutectic Mixture as Phase Change Materials for Energy Storage

From Journal of Materials Research:

Synthesis of novel shape-stabilized phase change materials with high latent heat and low supercooling degree for thermal energy storage

From Science of Advanced Materials:

Fabrication and Performance of Polyurethane/Polyurea Microencapsulated Phase Change Materials with Isophorone Diisocyanate via Interfacial Polymerization
Design and Analysis of Battery Box Based on Graphite-Phase Change Material and Air Cooling

From Experimental Techniques:

Design, Build, and Test a Hybrid Cooling System for Crash Helmet

From Journal of Thermal Analysis and Calorimetry:

Capric acid/intercalated diatomite as form-stable composite phase change material for thermal energy storage
Preparation and thermal performances of microencapsulated phase change materials with a nano-Al2O3-doped shell

PCM briefing: Ice Energy signs distribution deal; Bloom joins Sunamp as board chairman

Ben Welter - Monday, April 22, 2019

Ice Energy of Santa Barbara, Calif., has reached distribution agreements with four California companies to sell, install and maintain its ice-based thermal storage system, the Ice Bear 20. The companies are Correy Baker Heating and Air of Murrieta; Emery Mechanical Engineering of San Diego; H3 of Santa Barbara; and SunRize Mechanical of Temecula. “This distribution network will enable us to further expand our footprint in the residential market in Southern California,” said Marcel Christians, co-COO of Ice Energy.

Sonoco ThermoSafe and AirBridgeCargo Airlines have announced a global partnership agreement for the leasing of the PharmaPort 360 temperature-controlled shipping container. The agreement will enable pharmaceutical shippers to lease PharmaPort 360 containers directly from AirBridgeCargo.

Martin Bloom• Thermal battery maker Sunamp Ltd. of Scotland has appointed Martin Bloom as chairman of the board. Bloom, right, has extensive experience in high-growth technology and renewable energy companies, including Chinese solar company Renesola and Loughborough-based fuel cell specialist Intelligent Energy. Bloom succeeds Sunamp’s founding chairman, Bob Pettigrew, who oversaw its early growth.

Nominations are being accepted for the 2019 Poncelet Prize for Innovation in Microencapsulation, co-sponsored by Procter & Gamble and the Bioencapsulation Research Group. The award recognizes innovation in process design and modernization; development of new core and shell materials; innovation in characterization methods; or innovation in emerging fields of applications. The deadline for submitting nominations is May 31, 2019.

Peli BioThermal is rebranding its Chronos temperature-controlled shippers. CoolGuard PCM will replace Chronos Express, and CoolGuard Advance will replace Chronos Advance. The CoolGuard shippers will offer configurations with fewer components and additional temperature set points, such as 16º C.

• Registration is open for "Phase Change Material & Passive Cooling in Large Venues," a lunch-hour presentation by Henderson Engineers. The free event, sponsored by AIA Kansas City, will be held June 12 at the Center for Architecture & Design in Kansas City, Mo.

Axiotherm GmbH's kraftBoxx thermal energy storage system is a finalist for a Smarter E Award in the renewable energy category. KraftBoxx is a joint development with Klara Energy and Tuxhorn within the scope of the PCM-based HeatSel product line marketed by Axiotherm. Winners will be announced May 15 in Munich.

• PCM expert Harald Mehling's new book is available on Amazon: "Understanding the Basics of Energy: An Introduction from Simple to Complex Situations."

Tempur-Pedic of Lexington, Ky., says its new TEMPUR-breeze mattress will help sleepers "stay up to 8 degrees F cooler through the night." According to Tempur-Pedic: "At about 80°F, the molecules within TEMPUR-breeze’s most efficient Phase Change Material (PCM) to-date, PURECOOL+, activate, shifting from a solid to a liquid to absorb massive amounts of heat. For the first time, Tempur-Pedic’s scientists successfully altered these proprietary molecules to deliver more phase change material, increasing its capacity to absorb heat by 2x compared to other PCM."

• Two new ASHRAE publications will be available in June: "Owner’s Guide for Buildings Served by District Cooling" and an updated edition of the "District Cooling Guide" for designers and building owners around the world.

• Researchers at Sweden's KTH Royal Institute of Technology have developed a polyethylene glycol-infused wood material that could be used to make windows that absorb heat during the day and release it into the home at night. The researchers are working to increase the heat storage capacity of the transparent wood, Smithsonian.com reports.

Research roundup: Hollow aluminum bricks; animal-fat-based PCM for building applications; floor heating system design; more

Ben Welter - Wednesday, March 27, 2019

From Applied Thermal Engineering:

Thermal characteristics of aluminium hollowed bricks filled with phase change materials: Experimental and numerical analyses

From Energies:

Assessing the Potentiality of Animal Fat Based-Bio Phase Change Materials (PCM) for Building Applications: An Innovative Multipurpose Thermal Investigation

From Sustainable Energy and Fuels:

Innovative design of microencapsulated phase change materials for thermal energy storage and versatile applications: A review

From Environmental Research:

Design and analysis of phase change material based floor heating system for thermal energy storage

From Solar Energy Materials and Solar Cells:

Direct impregnation and characterization of Colemanite/Ulexite-Mg (OH) 2 paraffin based form-stable phase change composites
Experimental analysis of solar air collector with PCM-honeycomb combination under the natural convection

From Journal of Molecular Liquids:

Fabrication and characterization of phase change nanofluid with high thermophysical properties for thermal energy storage

From Renewable Energy:

Investigation of thermal properties and enhanced energy storage/release performance of silica fume/myristic acid composite doped with carbon nanotubes

From International Journal of Thermal Physics:

Thermal Property Characterization of a Low Supercooling Degree Binary Mixed Molten Salt for Thermal Energy Storage System

From Journal of Energy Storage:

From Energy Procedia:

Development of Corn-Oil Ester and Water Mixture Phase Change Materials for Food Refrigeration Applications
Experimental study on the performance of a new encapsulation panel for PCM's to be used in the PCM-Air heat exchanger

From Case Studies in Thermal Engineering:

Thermal characteristics on melting/solidification of low temperature PCM balls packed bed with air charging/discharging

Research roundup: Poly (methyl methacrylate) shell; calcium carbonate shell; macroscopic composite cement mortars; more

Ben Welter - Tuesday, March 19, 2019

From Energy Procedia:

Development of microencapsulated phase change material with poly (methyl methacrylate) shell for thermal energy storage
Supercooling study of erythritol/EG composite phase change materials
Thermal performance of pouch Lithium-ion battery module cooled by phase change materials
Active cooling based battery thermal management using composite phase change materials
Investigation on Thermal Performance of an Integrated Phase Change Material Blind System for Double Skin Facade Buildings
Experimental study on preparation of a novel foamed cement with paraffin/ expanded graphite composite phase change thermal energy storage material

From Colloids and Surfaces A: Physicochemical and Engineering Aspects:

Synthesis and performance evaluation of paraffin microcapsules with calcium carbonate shell modulated by different anionic surfactants for thermal energy storage

From Journal of Materials Chemistry A:

A novel shape-stabilization strategy for phase change thermal energy storage

From Journal of Molecular Liquids:

Melting of phase change materials in a trapezoidal cavity: Orientation and nanoparticles effects

From Energy and Buildings:

Development of new nano-enhanced phase change materials (NEPCM) to improve energy efficiency in buildings: lab-scale characterization

From Applied Sciences:

Efficient Characterization of Macroscopic Composite Cement Mortars with Various Contents of Phase Change Material

From Solar Energy:

Modelling and performance analysis of a new concept of integral collector storage (ICS) with phase change material

Research roundup: Personal cooling system; optimization of active wall system; cement mortar; asphalt pavement; more

Ben Welter - Friday, March 15, 2019

From International Journal of Refrigeration:

Experimental study of enhanced PCM exchangers applied in a thermal energy storage system for personal cooling

JMR illustration of microencapsulated n-octadecane with silk From Journal of Materials Research:

Fabrication and characterization of microencapsulated n-octadecane with silk fibroin–silver nanoparticles shell for thermal regulation

From IOP Conference Series: Earth and Environmental Sciences:

Simple Thermal Energy Storage Tank for Improving the Energy Efficiency of an Existing Air-conditioning System
An optimization study into thermally activated wall system with latent heat thermal energy storage
Simulation of operation performance of a solar assisted ground heat pump system with phase change thermal storage for heating in a rural building in Xi'an
Experimental Study on the Demand Shifting Effects of PCM Integrated Air-Conditioning Duct

From International Journal of Energy Research:

Efficiency optimisation of the thermal energy storage unit in the form of the ceiling panel for summer conditions

From Materials Research Express:

Experimental study on thermal conductivity of composite phase change material of fatty acid and paraffin

From Energies:

Design Optimization of a Hybrid Steam-PCM Thermal Energy Storage for Industrial Applications

From Construction and Building Materials:

Analysis of thermoregulation indices on microencapsulated phase change materials for asphalt pavement

From Applied Thermal Engineering:

Experimental and numerical characterization of an impure phase change material using a thermal lattice Boltzmann method

From Energy Conversion and Management:

Experimental and numerical study of a vertical earth-to-air heat exchanger system integrated with annular phase change material

From Materials:

Thermal and Structural Characterization of Geopolymer-Coated Polyurethane Foam—Phase Change Material Capsules/Geopolymer Concrete Composites

From Applied Sciences:

Microstructure and Mechanical Properties of Cement Mortar Containing Phase Change Materials

Research roundup: Radiant floor heating system; mitigation of supercooling; hot water stratification; more

Ben Welter - Friday, March 08, 2019

From Energies:

Analysis of Thermal Performance and Energy Saving Potential by PCM Radiant Floor Heating System based on Wet Construction Method and Hot Water

From Applied Energy:

Supercooling of phase-change materials and the techniques used to mitigate the phenomenon

From Polymer Chemistry:

Encapsulating an organic phase change material within emulsion-templated poly(urethane urea)s

From AIP Advances:

Thermal expansion effects on the one-dimensional liquid-solid phase transition in high temperature phase change materials

From Journal of Materials Chemistry A:

A thermal energy storage composite with sensing function and its thermal conductivity and thermal effusivity enhancement

From Materials Science and Engineering:

Experimental Measurements of Hot Water Stratification in a Heat Storage Tank

From Thermochimica Acta:

Modification of physical and thermal characteristics of stearic acid as a phase change materials using TiO2-nanoparticles

From Energy and Buildings:

Thermal and Structural Performance of Geopolymer Concrete Containing Phase Change Material Encapsulated in Expanded Clay
An experimental study on applying organic PCMs to gypsum-cement board for improving thermal performance of buildings in different climates

From International Journal of Biological Macromolecules:

Sodium alginate/feather keratin-g-allyloxy polyethylene glycol composite phase change fiber

From Construction and Building Materials:

Thermal properties of lightweight concrete incorporating high contents of phase change materials

From Progress in Organic Coatings:

Fabrication and characterization of microencapsulated n-heptadecane with graphene/starch composite shell for thermal energy storage

From Sustainable Energy and Fuels:

A thermal energy storage prototype using sodium magnesium hydride

From Thermal Science and Engineering Progress:

Experimental investigation of the thermal performance of a helical coil latent heat thermal energy storage for solar energy applications

From International Journal of Sports Physiology and Performance:

Exploring the Efficacy of a Safe Cryotherapy Alternative: Physiological Temperature Changes from Cold Water Immersion vs Prolonged Phase Change Material Cooling

From Applied Sciences:

A Form Stable Composite Phase Change Material for Thermal Energy Storage Applications over 700° C

Research roundup: PCM wallboard; cement mortars; electric load shifting; red-mud geopolymer composite; more

Ben Welter - Wednesday, February 27, 2019

From Renewable Energy:

Phase Change Material Wallboard (PCMW) melting temperature optimisation for passive indoor temperature control

From Cement and Concrete Research:

Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars

From Journal of Molecular Liquids:

Preparation and characterization of sodium sulfate pentahydrate/sodium pyrophosphate composite phase change energy storage materials

From Energy and Buildings:

Performance of heat pump integrated phase change material thermal storage for electric load shifting in building demand side management
Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: Experimental design and response surface approach

From International Journal of Photoenergy:

Experimental Study on the Performance of a Phase Change Slurry-Based Heat Pipe Solar Photovoltaic/Thermal Cogeneration System

From Solar Energy:

Effects of sodium nitrate concentration on thermophysical properties of solar salts and on the thermal energy storage cost
Red-mud geopolymer composite encapsulated phase change material for thermal comfort in built-sector [pdf]

From Energies:

A Novel Encapsulation Method for Phase Change Materials with a AgBr Shell as a Thermal Energy Storage Material

From Advanced Composites and Hybrid Materials:

Latent heat and thermal conductivity enhancements in polyethylene glycol/polyethylene glycol-grafted graphene oxide composites

From International Journal of Refrigeration:

Preparation and performance of form-stable TBAB hydrate/SiO2 composite PCM for cold energy storage

From Solar Energy Materials and Solar Cells:

Delignified wood/capric acid-palmitic acid mixture stable-form phase change material for thermal storage
Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: A review

From Buildings:

Thermal Performance of Hollow-Core Slab Ventilation System with Macro-Encapsulated Phase-Change Materials in Supply Air Duct

From International Journal of Heat and Mass Transfer:

Heat transfer performance of the finned nano-enhanced phase change material system under the inclination influence

From Journal of the Electrochemical Society:

Effect of High Temperature Circumstance on Lithium-Ion Battery and the Application of Phase Change Material

From Energy:

High-temperature PCM-based thermal energy storage for industrial furnaces installed in energy-intensive industries

Research roundup: Self-luminous wood composite; palmitic acid/mullite composite; corrosion sensitivity of metal alloys; more

Ben Welter - Tuesday, February 12, 2019

From Energy Storage Materials:

Self-luminous wood composite for both thermal and light energy storage

From International Journal of Refrigeration:

The thermal performances of a refrigerator incorporating a Phase Change Material

From Renewable Energy:

Enhanced thermal conductivity of palmitic acid/mullite phase change composite with graphite powder for thermal energy storage
An experimental study on the corrosion sensitivity of metal alloys for usage in PCM thermal energy storages

From Energy Conversion and Management:

Sorption thermal energy storage: Hybrid coating/granules adsorber design and hybrid TCM/PCM operation
Novel hybrid microencapsulated phase change materials incorporated wallboard for year-long year energy storage in buildings

From Thermochimica Acta:

Experimental Investigation on Thermal Properties of Sodium Acetate Trihydrate based Phase Change Materials for Thermal Energy Storage
The preparation of AgI/Au/foam-Cu as a framework of composite for water-based cool storage phase-change material with low supercooling

From Energy and Buildings:

Nano-encapsulation of phase change materials: from design to thermal performance, simulations and toxicological assessment
Investigation of phase change materials integrated with fin-tube baseboard convector for space heating

From Journal of Energy Storage:

Nano-enhancement of phase change material in a shell and multi-PCM-tube heat exchanger

From Applied Energy:

Numerical investigation of phase change material thermal storage for space cooling

From Journal of Materials Chemistry A:

Vertically aligned carbon fibers as supporting scaffolds for phase change composites with anisotropic thermal-conductivity and good shape-stability