Phase Change Matters RSS


The award-winning Phase Change Matters blog tracks the latest news and research on phase change materials and thermal energy storage. E-mail tips and comments to Ben Welter, communications director at Entropy Solutions. Follow the blog on Twitter at @PureTemp. Subscribe to the weekly PCM newsletter. Or join the discussion on LinkedIn.




Research roundup: Thermally conductive HDPE; pentaerythritol; RT44HC; epoxy resin composites; more

Ben Welter - Thursday, July 18, 2019

From Journal of Applied Polymer Science:

Thermally conductive high-density polyethylene as novel phase-change material: Application-relevant long-term stability
Reliable phase‐change polyurethane crosslinked by dynamic ionic‐bond crosslinking for thermal energy storage

From International Journal of Heat and Mass Transfer:

A molecular dynamics study of the effects of crystalline structure transition on the thermal conductivity of pentaerythritol as a solid-solid phase change material
A comparative study of the effect of varying wall heat flux on melting characteristics of phase change material RT44HC in rectangular test cells
High thermal response rate and super low supercooling degree microencapsulated phase change materials (MEPCM) developed by optimizing shell with various nanoparticles

From Materials Research Express:

Evaluation of thermophysical properties of shaped inorganic hydrated salt-based phase change materials for wall energy storage

From Construction and Building Materials:

Measurement and analysis of thermophysical parameters of the epoxy resin composites shape-stabilized phase change material
Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers

From Energy and Buildings:

Properties of concretes enhanced with phase change materials for building applications

From Hong Kong Polytechnic University:

Development of encapsulation methods for organic-based phase change materials in water

From Journal of Energy Storage:

Recent developments in the synthesis of microencapsulated and nanoencapsulated phase change materials

From Energy Conversion and Management:

Experimental and modeling study on thermal performance of hydrated salt latent heat thermal energy storage system

From Energies:

Thermal Response of Mortar Panels with Different Forms of Macro-Encapsulated Phase Change Materials: A Finite Element Study

From Renewable Energy:

Influence of the location of discrete macro-encapsulated thermal energy storage on the performance of a double pass solar plate collector system

From IOP Conference Series: Earth and Environmental Science:

Simulation and Analysis of Fuel Tank Heat Exchanger Based on Phase Change Material
Simulation Analysis of Thermal Storage Process of Phase Change Energy Storage Materials

From Nano-Structures & Nano-Objects:

Synthesis of organic phase change materials by using carbon nanotubes as filler material

From Processes:

Preparation and Performance Analysis of Graphite Additive/Paraffin Composite Phase Change Materials

From International Conference on Human-Computer Interaction:

Thermoregulating and Hydrating Microcapsules: Contributions of Textile Technology in the Design of Wearable Products for Wheelchair Dependents

From Materials Today:

Experimental study on hybrid natural circulation type solar air heater with paraffin wax based thermal storage

From Thermal Science and Engineering Progress:

Numerical and Experimental Investigation of Melting Characteristics of Phase Change Material-RT58

Glacier Tek adds flexible PCM microspheres to new line of cooling packs

Ben Welter - Monday, July 15, 2019

Glacier Tek LLC of Minneapolis has incorporated flexible PCM microspheres in the cooling packs used in its Flex Vest line of cooling vests. 

Glacier Tek's new cooling packsThe cooling packs, redesigned for improved comfort and performance, feature a soft, durable nylon shell. They reach a flexible state more quickly and feel colder than the previous packs. 

The Flex Vest is designed to maintain a comfortable microclimate of 18 degrees C for up to 2.5 hours. The new packs can be recharged in about 30 minutes in ice water or two hours in a refrigerator. But they are most effective when fully solidified in a freezer, which takes about an hour. The cooling packs weigh about 164 grams each and fit into 12 pockets inside the vest.

The novel cooling material, developed by PureTemp LLC of Minneapolis, is composed of a biobased phased change material. It is similar to the material used in the Glacier Tek therapy cooling packs introduced at the American College of Sports Medicine trade show in Orlando in May.

"PureTemp is excited to bring this shape-stabilized PCM format to the market," said Chris Servais, vice president of operations at PureTemp. "Glacier Tek has capitalized on its unique and improved characteristics.”

Patent application: Viscoelastic polyurethane foam with coating

Ben Welter - Friday, July 12, 2019

U.S. patent application 20190211171 (assignees Dow Global Technologies LLC, Midland, Mich., and Rohm and Haas Co., Collegeville, Penn.):

"A coated viscoelastic polyurethane foam includes a viscoelastic polyurethane foam having the coating thereon, the viscoelastic polyurethane foam having a resiliency of less than or equal to 20% as measured according to ASTM D3574, and a coating material on and embedded within the viscoelastic polyurethane foam, the coating material including an aqueous polymer emulsion and an encapsulated phase change material."

Research roundup: Foamed cement blocks; polyethylene glycol/wood flour composites; radiant ceiling panels; more

Ben Welter - Thursday, July 11, 2019

From Trends in Food Science & Technology:

Micro/nano-encapsulated phase change materials (PCMs) as emerging materials for the food industry

From Solar Energy Materials and Solar Cells:

A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material
Solvent-free preparation of bio-based polyethylene glycol/wood flour composites as novel shape-stabilized phase change materials for solar thermal energy storage
Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications
Preparation and characterization of microencapsulated phase change materials containing inorganic hydrated salt with silica shell for thermal energy storage
Enhancing thermal conductivity of paraffin wax 53–57 °C using expanded graphite

From Solar Energy:

Simultaneous charging and discharging of phase change materials: Development of correlation for liquid fraction

From Energy and Buildings:

Numerical study of the electrical load shift capability of a ground source heat pump system with phase change thermal storage

From International Conference on Materials, Environment, Mechanical and Industrial Systems:

Simulation-based analysis of the use of PCM and shading devices to improve the thermal comfort in buildings

From Applied Thermal Engineering:

Experimental study of a pilot-scale fin-and-tube phase change material storage
On-demand Intermittent Ice Slurry Generation for Subzero Cold Thermal Energy Storage: Numerical Simulation and Performance Analysis
Atomistic modelling of water transport and adsorption mechanisms in silicoaluminophosphate for thermal energy storage

From Clima 2019, 13th REHVA World Congress:

Experimental comparison of radiant ceiling panels and ceiling panels containing phase change material (PCM)

From Journal of Energy Storage:

Review of stability and thermal conductivity enhancements for salt hydrates
Characterisation of promising phase change materials for high temperature thermal energy storage

From Journal of Cleaner Production:

Self-assembly of 3D-graphite block infiltrated phase change materials with increased thermal conductivity

From Sustainable Cities and Society:

Thermal Performance Difference of Phase Change Energy Storage Units Based on Tubular Macro-encapsulation

From Renewable and Sustainable Energy Reviews:

State-of-technology review of water-based closed seasonal thermal energy storage systems

From Applied Energy:

Thermal energy storage in district heating and cooling systems: A review

From Polymers:

Fabrication and Characterization of Novel Shape-Stabilized Phase Change Materials Based on P(TDA-co-HDA)/GO Composites 

Research roundup: Spent coffee grounds; tropical tree fruit oils; natural rubber composites; more

Ben Welter - Friday, July 05, 2019

From Chemosphere:

Spent coffee grounds as supporting materials to produce bio-composite PCM with natural waxes

From Biotechnology Reports:

Novel phase change materials for thermal energy storage: evaluation of tropical tree fruit oils

From Construction and Building Materials:

Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material
Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers

From Case Studies in Thermal Engineering:

Optimal fin parameters used for enhancing the melting and solidification of phase-change material in a heat exchanger unite

From Materials Chemistry and Physics:

Porous geopolymer as a possible template for a phase change material

From Journal of Physics: Conference Series:

Thermophysical Characteristics of VCO-Soybean Oil Mixture as Phase Change Material (PCM) using T-History Method

From Rubber Chemistry and Technology:

Phase-Change Material: Natural Rubber Composites for Heat Storage Applications

From Powder Technology:

An enthalpy based discrete thermal modelling framework for particulate systems with phase change materials

From Chemistry Select:

Carbon Soot/n–carboxylic Acids Composites As Form‐stable Phase Change Materials For Thermal Energy Storage

From International Journal of Heat and Mass Transfer:

Experimental study of thermo-physical properties and application of paraffin-carbon nanotubes composite phase change materials
High thermal response rate and super low supercooling degree microencapsulated phase change materials (MEPCM) developed by optimizing shell with various nanoparticles

From Applied Thermal Engineering:

Design optimization of the phase change material integrated solar receiver: A numerical parametric study

From Solar Energy Materials and Solar Cells:

Synthesis and characterization of ditetradecyl succinate and dioctadecyl succinate as novel phase change materials for thermal energy storage

From Advanced Materials Interfaces:

Doubly Coated, Organic–Inorganic Paraffin Phase Change Materials: Zinc Oxide Coating of Hermetically Encapsulated Paraffins

From Journal of Energy Storage:

Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application

PCM briefing: Axiotherm wins 2 innovation awards; newly commissioned pilot power plant in Sweden uses SaltX TES

Ben Welter - Friday, July 05, 2019

ESDA-Axiotherm GmbH won two awards in this year's INNOspace Masters ideas competition. The competition, sponsored by the Space Administration of the German Aerospace Center, honors innovative ideas that address the challenges faced by the space industry. The winners were announced this week in Berlin. ESDA-Axiotherm won the overall prize for the development of a PCM polymer compound for the thermal stabilization of components and systems. The German company also won the OHB Challenge, which honors ready-to-use solutions.

Noor Abu Dhabi, the world’s largest single-site solar power project with an installed capacity of 1,177 MW, has been successfully commissioned. The project is a joint venture between the government of Abu Dhabi and a consortium comprising Marubeni Corp., Japan, and Jinko Solar Holding, China. Abu Dhabi says the project's 3.2 million solar  panels provide enough power for 90,000 people. 

• The Swedish power producer Vattenfall has commissioned an industrial-scale, 0.5 MW/10 MWh, pilot test facility at its Reuter power plant, employing thermal energy storage technology developed by SaltX of Sweden. The technology uses nano-coated salts to store thermal energy. 

Croda International Plc posted a product announcement on its LinkedIn page this week: "CrodaTherm can be incorporated into wearable and non-wearable textile fibres to improve temperature regulation." There's more information on According to the website, Croda has encapsulated its bio-based phase change material "in a durable acrylic polymer shell, so that when the bio-based core changes phase, the particle remains solid." I hope to have more details on the technology in time for next week's newsletter.